Dedicated Equipment Switchbox
Rated current: 63A – 800A
Enclosure thickness: 2.0mm steel or stainless
Protection rating: IP54 – IP65
What Is This Product? – It Is Made for One Big Machine, Following the "One Machine, One Box" Safety Rule
A Dedicated Equipment Switchbox is built for a single large power device.
These devices include air compressors, elevators, central AC chillers, water pumps, and cranes.
It is usually placed within 3 meters of the equipment for easy emergency shutdown.
This product meets IEC 60947-4.
Rated current is 63A to 800A.
Inside, we put a molded case breaker with auxiliary contacts and alarm contacts.
You can also add a contactor, a thermal relay, or an electronic overload relay.
The box can be wall-mounted or floor-standing.
Protection rating is IP54 to IP65.
China Railway and China Railway Construction use our Dedicated Equipment Switchbox for their large on-site machines.
FAQ
What Materials and Processes Do We Use? – We Use Heavy Steel with Outdoor Coating and a Visible Break Option
The door has a rain channel, a sealing strip, and a stainless steel handle lock.
The internal mounting plate can swing out or pull out for easy wiring.
For the main breaker, we recommend a transparent molded case breaker like the NM1 series transparent type.
You can see the contact position directly.
Cables enter through waterproof glands with cable clamps.
For outdoor types, the top has a rain hood.
Inside, we put a light and a service socket, 220V/10A.
Our factory is 2,000 square meters with ISO9001 certification.
|
Parameter |
Value |
|
Standard |
IEC 60947-4 |
|
Rated current |
63A – 800A |
|
Enclosure thickness |
2.0mm steel or stainless |
|
Protection rating |
IP54 – IP65 |
|
Main breaker type |
Transparent molded case (optional) |
|
Service socket |
220V/10A |
|
Mounting |
Wall or floor |
What Are the Core Advantages? – Motor Protection and Remote Control Built In, with Explosion-Proof Option
The core features are full protection plus remote monitoring.
We configure a motor-protection circuit breaker with phase loss, overload, and stall protection.
You can also add a soft starter or a VFD (variable frequency drive) interface.
Inside, we can put a current transmitter that outputs 4-20mA to your DCS system.
Outside the box, we put an emergency stop button (twist-to-reset type) and run/stop/fault indicator lights.
If you need explosion-proof, we offer flameproof (Ex d) or increased safety (Ex e) boxes with an explosion-proof certificate.
This product has CCC and CE certification.
We accept drawings for custom orders and can draw electrical schematics for you.
FAQ
Hot Tags: dedicated equipment switchbox, China dedicated equipment switchbox manufacturers, suppliers, Battery Disconnect Panel, Electrical Receptacle Box, Electrical Switch Enclosure, Feeder Pillar Box, Handheld Switch Unit, Switch Board Box
You Might Also Like
Send Inquiry